Mass Air Flow (MAF) Sensor Range/Performance
P0101 means the reading from the mass air flow sensor doesn’t match what the computer expects from other sensors like throttle position, rpm and manifold pressure.
What does it mean?
The MAF sensor measures how much air enters the engine so the computer can add the right amount of fuel.
Dirt or oil on the sensor is the most common cause, followed by air leaks between the sensor and the engine.
Can I keep driving?
Usually drivable, but you may notice hesitation, poor fuel economy or stalling. Get it fixed soon.
Common symptoms
- Check engine light
- Hesitation or stalling
- Poor fuel economy
- Lean or rich codes alongside it
Most likely causes
- Dirty MAF sensorOiled air filters and dust coat the sensing wire.
- Air leak after the MAFA cracked intake boot lets in unmeasured air.
- Clogged air filterRestricts and disturbs the airflow.
- Failed MAF sensorIf cleaning doesn’t help.
How to diagnose and fix it
- Inspect the air filter and replace it if dirty.
- Check the intake boot between the MAF and throttle body for cracks.
- Clean the MAF sensor with MAF-specific cleaner and let it dry fully.
- Compare MAF readings with specifications at idle and 2,500 rpm.
How much does it cost to fix?
Typical independent-shop price in the US, parts and labor. Your price depends on the cause, the car and where you live.
Get an explanation for your car
Tell Auto AI your car and it will rank the causes for that exact engine.
Frequently asked questions
Can I clean a MAF sensor with carb cleaner?
No. Use only MAF sensor cleaner; other chemicals can damage it.
Is a MAF sensor expensive?
Aftermarket sensors are often $60–$150, and OEM parts more. It’s usually a quick swap.
Reviewed: · Auto AI