1. Home
  2. Codes
  3. P0135
P0135

O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)

Severity: LowCan I keep driving? Yes, for nowPowertrain (engine & transmission)

P0135 means the heater in the upstream oxygen sensor on bank 1, the one before the catalytic converter, has a fault.

What does it mean?

This sensor is the main input the computer uses to adjust the air-fuel mixture. Its heater gets it working within seconds of a cold start.

When the heater fails, the engine runs a less precise mixture until the exhaust heats the sensor, which raises emissions and fuel use.

Can I keep driving?

Yes, for now

Yes, you can drive. Expect slightly worse fuel economy, especially on short trips, and get it fixed before an inspection.

Common symptoms

  • Check engine light
  • Slightly worse fuel economy
  • Rough running just after a cold start, in some cars

Most likely causes

  1. Failed oxygen sensor heater elementThe sensor itself needs replacing.
  2. Blown fuse or failed relayOften shared with other sensors.
  3. Wiring damage near the exhaustMelted insulation or broken wires.

How to diagnose and fix it

  1. Check the oxygen sensor heater fuse.
  2. Inspect the wiring and connector for heat damage.
  3. Measure heater resistance and supply voltage at the connector.
  4. Replace the upstream sensor with a quality part if the heater is faulty.

How much does it cost to fix?

$150 – $450

Typical independent-shop price in the US, parts and labor. Your price depends on the cause, the car and where you live.

DIY difficulty●●○

Get an explanation for your car

Tell Auto AI your car and it will rank the causes for that exact engine.

Frequently asked questions

Is P0135 the same as P0141?

Same type of fault, different sensor: P0135 is the upstream sensor, P0141 the downstream sensor.

Should I buy a universal oxygen sensor?

A direct-fit sensor with the correct connector is more reliable and easier to install.

Reviewed: · Auto AI