1. Home
  2. Codes
  3. P0298
P0298

Engine oil temperature too high

Severity: CriticalCan I keep driving? NoPowertrain (engine & transmission)

P0298 is a generic OBD-II trouble code in the fuel and air metering area. It means: engine oil temperature too high.

What does it mean?

Temperature sensors report coolant, intake air, oil, fuel or exhaust temperature so the computer can adjust fuel, timing and fans.

The description points to a performance fault: the circuit works, but the part or system isn’t behaving as expected. That usually means a worn part or a real mechanical problem rather than wiring.

This is a generic OBD-II code: the definition is the same for every make, but the most common cause can differ by engine.

Can I keep driving?

No

Stop driving. Have the car checked before using it again.

Most likely causes

  1. A failed sensor
  2. A damaged connector or wiring
  3. A real temperature problem, such as a stuck thermostat or low coolant

How to diagnose and fix it

  1. Scan for all stored and pending codes, not just this one; related codes often share one cause.
  2. Compare the sensor’s live reading with the real temperature.
  3. A cold engine should read close to the outside temperature.
  4. Clear the code after the repair and drive normally to confirm it doesn’t return.

Get an explanation for your car

Tell Auto AI your car and it will rank the causes for that exact engine.

Frequently asked questions

What does P0298 mean?

P0298 means engine oil temperature too high. Temperature sensors report coolant, intake air, oil, fuel or exhaust temperature so the computer can adjust fuel, timing and fans.

Can I drive with P0298?

Stop driving. Have the car checked before using it again.

How do I fix P0298?

Start with the cheapest checks: Scan for all stored and pending codes, not just this one; related codes often share one cause. Compare the sensor’s live reading with the real temperature. An AI explanation for your exact car can rank the causes for that engine.

Reviewed: · Auto AI