1. Home
  2. Codes
  3. P0604
P0604

Control module RAM error

Severity: HighCan I keep driving? With cautionPowertrain (engine & transmission)

P0604 is a generic OBD-II trouble code in the engine computer and output circuits area. It means: control module RAM error.

What does it mean?

These codes concern the engine computer itself or the circuits it uses to control other parts.

Look at any other codes stored with it; together they usually point to the root cause.

This is a generic OBD-II code: the definition is the same for every make, but the most common cause can differ by engine.

Can I keep driving?

With caution

Drive only if you must, and gently. Get it checked as soon as possible.

Most likely causes

  1. Low battery voltage or poor grounds
  2. A wiring fault on the controlled circuit
  3. Water damage to a module
  4. An internal module fault (less common)

How to diagnose and fix it

  1. Scan for all stored and pending codes, not just this one; related codes often share one cause.
  2. Rule out battery and ground problems before suspecting the computer.
  3. Some faults clear after a software update at the dealer.
  4. Clear the code after the repair and drive normally to confirm it doesn’t return.

Get an explanation for your car

Tell Auto AI your car and it will rank the causes for that exact engine.

Frequently asked questions

What does P0604 mean?

P0604 means control module RAM error. These codes concern the engine computer itself or the circuits it uses to control other parts.

Can I drive with P0604?

Drive only if you must, and gently. Get it checked as soon as possible.

How do I fix P0604?

Start with the cheapest checks: Scan for all stored and pending codes, not just this one; related codes often share one cause. Rule out battery and ground problems before suspecting the computer. An AI explanation for your exact car can rank the causes for that engine.

Reviewed: · Auto AI