Diesel particulate filter differential pressure too high (Bank 1)
P244B is a generic OBD-II trouble code in the emission controls area. It means: diesel particulate filter differential pressure too high (Bank 1).
What does it mean?
Diesel engines use glow plugs for cold starts and a particulate filter and other after-treatment to clean the exhaust.
The description points to a performance fault: the circuit works, but the part or system isn’t behaving as expected. That usually means a worn part or a real mechanical problem rather than wiring.
This is a generic OBD-II code: the definition is the same for every make, but the most common cause can differ by engine.
Can I keep driving?
Drive only if you must, and gently. Get it checked as soon as possible.
Most likely causes
- Failed glow plugs or glow plug module
- A clogged particulate filter from short trips
- A faulty pressure sensor or its hoses
- Problems with the exhaust fluid system
How to diagnose and fix it
- Scan for all stored and pending codes, not just this one; related codes often share one cause.
- A long motorway drive can help a particulate filter regenerate.
- Don’t ignore after-treatment codes: they can lead to reduced power.
- Clear the code after the repair and drive normally to confirm it doesn’t return.
Get an explanation for your car
Tell Auto AI your car and it will rank the causes for that exact engine.
Frequently asked questions
What does P244B mean?
P244B means diesel particulate filter differential pressure too high (Bank 1). Diesel engines use glow plugs for cold starts and a particulate filter and other after-treatment to clean the exhaust.
Can I drive with P244B?
Drive only if you must, and gently. Get it checked as soon as possible.
How do I fix P244B?
Start with the cheapest checks: Scan for all stored and pending codes, not just this one; related codes often share one cause. A long motorway drive can help a particulate filter regenerate. An AI explanation for your exact car can rank the causes for that engine.
Reviewed: · Auto AI